|
 |
|
|
Meyer Under
Tailgate Spreaders |
|
|
 |
UTG
Under Tailgate |
|
The Meyer under tailgate spreader (UTG) is designed to mount
below all standard dump body tailgates. This spreader is
available in two powerful drive systems; a high performance,
low maintenance - Direct Drive or a heavy duty Gearbox
Drive. The adjustable spinner frame allows for appropriate
minimum spinner clearance and precise spread control.
The UTG spreader is equipped with separate hydraulic motors
for the auger and spinner to allow for independent control
of each function. The unique hydraulic safety interlock
system-disables the auger during clean out and maintenance
operations-provides for optimum operator safety.
|
|
|
|
•
Maximizes your existing dump body
• Multiple configurations to fit your
needs |
|
•
Built-In Safety System provides operator
safety
• Available in carbon or stainless steel
|
|
Hopper
Length |
Capacity |
Height |
Weight |
Width |
Length |
Hopper |
Operating
System |
Spreading
Width |
Material |
|
N/A |
6 to 21 lbs |
19" |
450 to 600 lbs |
88" or 96" |
N/A |
N/A |
Hydraulic |
4 to 40 ft. |
Salt, Salt/Sand |
|
|
|
 |
RTG
Replaceable Tailgate |
|
The Meyer RTG replaceable tailgate spreader is designed to
replace the standard dump body tailgate. This spreader is
equipped with separate hydraulic motors for the auger and
the spinner for independent control. The RTG features an
easy opening bottom cleanout gate which incorporates a
hydraulic safety interlock system to disable the auger
during clean out or maintenance.
The single 6" auger with continuous fitting discharges
approximately 5.0 lbs/rev. and the incorporated trough
agitator keeps the material free flowing. The 18"
polyurethane spinner disc extends the spinner life in
corrosive environments.
|
|
|
|
•
Maximizes your existing dump body
• Optimized for straight salt and low
output
|
|
•
Available in carbon or stainless steel |
|
Hopper
Length |
Capacity |
Height |
Weight |
Width |
Length |
Hopper |
Operating
System |
Spreading
Width |
Material |
|
N/A |
5 lbs/rev |
23" |
550 lbs |
88" |
N/A |
N/A |
Hydraulic |
4 to 40 ft. |
Salt, Salt/Sand |
|
|
|
 |
Cross Conveyor
Hot & Cold Two-way Material Conveying |
|
The Meyer Tailgate Cross Conveyor is designed to extend the
versatility of your standard dump body to include high
temperature and large volume material conveying. The cross
conveyor conveys materials to either end of the rugged 14”
wide hi-temperature belt conveyor and includes dual feed
gates.
A dual-function top cover is a Meyer industry exclusive
which can be lowered to both protect the conveyor and allow
true dump-bed operation when the conveyor is still attached.
|
|
|
|
•
Conveys both free-flowing and high-
temperature materials
• Maximizes your existing dump body
|
|
•
Conveniently discharges to either side
• 102" Hopper |
|
|
Hopper
Length |
Capacity |
Height |
Weight |
Width |
Length |
Hopper |
Operating
System |
Spreading
Width |
Material |
|
N/A |
240 Tons per hour |
33.5" |
1100 lbs |
102" |
N/A |
N/A |
Hydraulic |
N/A |
Free Flowing
Mat'l |
|
|
 |
|
|
|
|
|
|
